一色狗电影院,一色狗电影院,超污视频软件,91制厂片考研的姐姐,快猫9.1免费版安装指南,免费在线观看网站,国产又猛又粗又黄,动态o视频,《闲云岛》隐世桃源,白丝袜精华液涂抹脚部,字HD丈夫的下属的成就与荣誉

Airhank Ka series wind blade is widely used in Hank high pressure air blower and high speed turbine blower in the automotive industry abroad, especially in the automotive contour production, which widely replaces the way of compressed air and nozzle drying. In the past, the energy consumption of the drying system for automotive contour production is very amazing, generally more than 90kw, or even higher, and the drying effect is not necessarily the same Very good, efficiency is not very high, Airhank research and development of air knife drying system in the automotive industry, due to strong air drying, low energy consumption, generally can save more than 3-5 million cost for the production plant every year, the general system only needs 11-22kw, not only good drying effect, low energy consumption, and efficiency can be improved by more than 200%.

Advantages of Airhank air knife system

◆The wind speed of the air knife is more than 40 times of the original wind speed.

◆Energy consumption is generally reduced by 150-300%.

◆30-150% improvement in efficiency

◆Air knife installation is simple, convenient, maintenance free, long life, once installed, 10 years worry free

◆The air outlet can be adjusted to 0.6-1.5MM, so that the traction air volume, wind speed and wind pressure can be adjusted.

◆The blade size can be customized according to customers' requirements, and the customized length can reach up to 2000mm.

◆A variety of air inlet caliber can be selected, and the air inlet position has top, side and back options, which is convenient for installation.

◆The maximum temperature resistance is 250 kg2f / cm2 and the maximum wind speed is 200 ℃.

◆It can be used with high pressure air blower, high speed centrifugal blower and air compressor, which is flexible and convenient.